HttpException : Unable to validate data

HttpException : Unable to validate data

am 15.02.2006 13:28:30 von james.crowley

[Apologies for the duplicate, I posted the first from the wrong email alias]
Hi everyone,

My site is randomly firing off a "ExceptionHttpException : Unable to
validate data. " error on some of its forms at the moment:
-------
HttpException : Unable to validate data.
http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx (Referred
by http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx)
at System.Web.Configuration.MachineKeySection.GetDecodedData(By te[] buf,
Byte[] modifier, Int32 start, Int32 length, Int32& dataLength)
at System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
-----------
I can't reproduce it myself, but several users and the automatic error
reports that have been generated indicate this. The site isn't running on a
web farm or anything, the application pool isn't being recycled, and I've
tried the standard solutions of specifying a fixed machine
validation/encryption key, and I've also tried disabling the view state mac
entirely, but the problem persists. Does anyone have any ideas what might be
triggering this?

Thanks,

- James
www.developerfusion.co.uk

RE: HttpException : Unable to validate data

am 16.02.2006 08:28:00 von stcheng

Hi James,

Welcome to the MSDN newsgroup.

As for the "HttpException : Unable to validate data." error you mentioned,
based on my experience, there does exists many threads discussing on this
issue. However, most of them are of the webfarm scenario which dosn't
correctly set the MachineKey.
For your scenario, it seems that the error is caused by something else,
also since the problem is reported by some other end users and you haven't
reproduced it on your side, it'll be a bit hard for us to throubleshoot.
One possible cause I'm thinking is that when our ASP.NET page is requested
by some other single html page or non-asp.net page through POST method,
this could cause viewstate validation failure issue. So is it possible that
some other client user use some other tools or own custom page to do post
to your web page? If all the post are done within the same page or same
application's page through cross-page post-back, it maybe some other
specific problem.

Regards,

Steven Cheng
Microsoft Online Support

Get Secure! www.microsoft.com/security
(This posting is provided "AS IS", with no warranties, and confers no
rights.)

RE: HttpException : Unable to validate data

am 16.02.2006 11:47:29 von james.crowley

Hi Steven,

Thanks for the info. The error is definitely occuring on an ASP.NET page,
posting back to the same ASP.NET page (I've confirmed this with several of
the users). Sometimes the error persists when they click the submission
button again - and sometimes it doesn't.

Any ideas? Thanks!

- James

RE: HttpException : Unable to validate data

am 17.02.2006 09:21:46 von stcheng

So far I haven't heard any existing issue on this. Can your end users
isolate the problem to some particular pages?

Regards,

Steven Cheng
Microsoft Online Support

Get Secure! www.microsoft.com/security
(This posting is provided "AS IS", with no warranties, and confers no
rights.)

RE: HttpException : Unable to validate data

am 17.02.2006 12:11:27 von james.crowley

Yes, the problem seems largely limited to one specific page. Though it has
very very occasionally occured on another.

Unfortunately I haven't been able to track down exactly what is wrong with
the page that is triggering the error - and because of the intermittent
nature of the problem (and the fact I can only test it by making the modified
page "live" on the site) it's a bit of a pain.

Shall I post the ASPX and CS code here?

RE: HttpException : Unable to validate data

am 21.02.2006 07:59:37 von stcheng

Thanks for your response James,

Sure, you can post some test pages so that I can perform some tests on my
side though generally it'll be hard to reproduce it.

Regards,

Steven Cheng
Microsoft Online Support

Get Secure! www.microsoft.com/security
(This posting is provided "AS IS", with no warranties, and confers no
rights.)

RE: HttpException : Unable to validate data

am 21.02.2006 10:11:27 von james.crowley

Am I going to be better off raising a full product support issue to get this
resolved? It's still happening often enough to our users that I really need
to get this sorted :-)

- James

RE: HttpException : Unable to validate data

am 22.02.2006 07:46:20 von stcheng

Thanks for reply James,

Yes, for such issue, thorough throubleshooting from PSS maybe helpful.
However, I think PSS will also require us to provide a simple reproduce
package for test. Though they can help perform remote debugging , but
that'll be very inconvenient. Also, since currently it can only reproduce
on your end user's side, I think PSS guys will have to remotly connect to
your end users's machine if need to perform runtime debugging at client.

Regards,

Steven Cheng
Microsoft Online Support

Get Secure! www.microsoft.com/security
(This posting is provided "AS IS", with no warranties, and confers no
rights.)

RE: HttpException : Unable to validate data

am 10.08.2007 21:48:00 von Marie

Hi,

Can somebody please comment on the following proposed fixes indicated for
the error discussed in this thread? I'd like your opinions -- are we on the
right track --or is this a red herring we are following here?

We have installed a single-server Sharepoint 2007 FARM (using the advanced
"Complete" option) and enabled our single application on port 80. The
application, features, subpages, and functions, work well except for the
document check-in, check-out, publishing options on any document we have
placed in the shared document webparts on any of our application pages.

When you right-mouse-click on a document and select the "check-out" option,
immediately you will receive an "Unknown Error" message, and the operation
fails. The same error occurs for Check-In, and "Publish" operations on that
document (using the shared documents web part provided by Microsoft).

We have trapped the following error when this occurs:

"Unable to validate data. at
System.Web.Configuration.MachineKeySection.GetDecodedData(By te[] buf, Byte[]
modifier, Int32 start, Int32 length, Int32& dataLength) at
System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)

There is much experience with this same error on the Internet; various
developers are explaining how with a Sharepoint 2007 Farm implementation,
developers need to explicitly define the machine key setting, not allowing
them to autogenerate.

Have researched the following four links that describe this requirement:



http://support.stormhosts.net/showthread.php?p=2521



http://forums.whirlpool.net.au/forum-replies-archive.cfm/677 326.html



http://www.kbalertz.com/Feedback.aspx?kbNumber=313091



http://msdn2.microsoft.com/en-us/library/system.web.configur ation.machinekeysection.aspx

The main concern I have in following any of these suggestions in repairing
this error that we've encountered with the check-out/check-in and publish
options on a document in the "Shared Documents" web part is that the script
for the Sharepoint 2007 Complete installation did not tell us we needed to
set static machinekeys in web configuration files. So, I would feel
comfortable if I knew others had done the same in this scenario and were
successful.

Thanks, everybody!

--Marie




"James Crowley" wrote:

> [Apologies for the duplicate, I posted the first from the wrong email alias]
> Hi everyone,
>
> My site is randomly firing off a "ExceptionHttpException : Unable to
> validate data. " error on some of its forms at the moment:
> -------
> HttpException : Unable to validate data.
> http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx (Referred
> by http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx)
> at System.Web.Configuration.MachineKeySection.GetDecodedData(By te[] buf,
> Byte[] modifier, Int32 start, Int32 length, Int32& dataLength)
> at System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
> -----------
> I can't reproduce it myself, but several users and the automatic error
> reports that have been generated indicate this. The site isn't running on a
> web farm or anything, the application pool isn't being recycled, and I've
> tried the standard solutions of specifying a fixed machine
> validation/encryption key, and I've also tried disabling the view state mac
> entirely, but the problem persists. Does anyone have any ideas what might be
> triggering this?
>
> Thanks,
>
> - James
> www.developerfusion.co.uk

Re: HttpException : Unable to validate data

am 11.08.2007 03:43:24 von unknown

I'll take a chance and comment. I don't see why the machine key encryption
should be the cause. If it were, a lot more than checkin/checkout would
fail. Have you looked at permissions configurations for the users where this
is failing? Check-in/out is basically a file copy. That is where I would
start using a tool like filemon for instance.

Have you also tried removing/deleting the document library and recreating
it? Have you tried running the repair wizard on the site?

--
Regards,
Alvin Bruney
------------------------------------------------------
Shameless author plug
Excel Services for .NET - MS Press
Professional VSTO 2005 - Wrox/Wiley
OWC Black Book www.lulu.com/owc

"Marie" wrote in message
news:9F53C45D-C7E1-4656-BC7F-C6259480FC90@microsoft.com...
> Hi,
>
> Can somebody please comment on the following proposed fixes indicated for
> the error discussed in this thread? I'd like your opinions -- are we on
> the
> right track --or is this a red herring we are following here?
>
> We have installed a single-server Sharepoint 2007 FARM (using the advanced
> "Complete" option) and enabled our single application on port 80. The
> application, features, subpages, and functions, work well except for the
> document check-in, check-out, publishing options on any document we have
> placed in the shared document webparts on any of our application pages.
>
> When you right-mouse-click on a document and select the "check-out"
> option,
> immediately you will receive an "Unknown Error" message, and the operation
> fails. The same error occurs for Check-In, and "Publish" operations on
> that
> document (using the shared documents web part provided by Microsoft).
>
> We have trapped the following error when this occurs:
>
> "Unable to validate data. at
> System.Web.Configuration.MachineKeySection.GetDecodedData(By te[] buf,
> Byte[]
> modifier, Int32 start, Int32 length, Int32& dataLength) at
> System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
>
> There is much experience with this same error on the Internet; various
> developers are explaining how with a Sharepoint 2007 Farm implementation,
> developers need to explicitly define the machine key setting, not allowing
> them to autogenerate.
>
> Have researched the following four links that describe this requirement:
>
>
>
> http://support.stormhosts.net/showthread.php?p=2521
>
>
>
> http://forums.whirlpool.net.au/forum-replies-archive.cfm/677 326.html
>
>
>
> http://www.kbalertz.com/Feedback.aspx?kbNumber=313091
>
>
>
> http://msdn2.microsoft.com/en-us/library/system.web.configur ation.machinekeysection.aspx
>
> The main concern I have in following any of these suggestions in repairing
> this error that we've encountered with the check-out/check-in and publish
> options on a document in the "Shared Documents" web part is that the
> script
> for the Sharepoint 2007 Complete installation did not tell us we needed to
> set static machinekeys in web configuration files. So, I would feel
> comfortable if I knew others had done the same in this scenario and were
> successful.
>
> Thanks, everybody!
>
> --Marie
>
>
>
>
> "James Crowley" wrote:
>
>> [Apologies for the duplicate, I posted the first from the wrong email
>> alias]
>> Hi everyone,
>>
>> My site is randomly firing off a "ExceptionHttpException : Unable to
>> validate data. " error on some of its forms at the moment:
>> -------
>> HttpException : Unable to validate data.
>> http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx
>> (Referred
>> by http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx)
>> at System.Web.Configuration.MachineKeySection.GetDecodedData(By te[]
>> buf,
>> Byte[] modifier, Int32 start, Int32 length, Int32& dataLength)
>> at System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
>> -----------
>> I can't reproduce it myself, but several users and the automatic error
>> reports that have been generated indicate this. The site isn't running on
>> a
>> web farm or anything, the application pool isn't being recycled, and I've
>> tried the standard solutions of specifying a fixed machine
>> validation/encryption key, and I've also tried disabling the view state
>> mac
>> entirely, but the problem persists. Does anyone have any ideas what might
>> be
>> triggering this?
>>
>> Thanks,
>>
>> - James
>> www.developerfusion.co.uk

Re: HttpException : Unable to validate data

am 29.08.2007 15:58:00 von Marie

Hello, Alvin,

We've looked at the file monitor while executing the checkout option;
nothing stood out in particular in the way of a failure on file copy; the
error that we trap, repeatedly, during execution of the "checkout" option on
a document in our shared library, is that httpexection: unable to validate
data...discussed elsewhere on this same thread, as reported by other users
having our configuration. We've reproduced the error twice in our
environment, once on our test server where we initially installed SharePoint
2007 using the "advanced" complete, standalone options -- in a "Farm"
configuration with a single-server, where we created an application on port
80, and then again, using the same configuration on our production server, on
a separate network. In both instances, the SharePoint 2007 installations ran
error-free; in both instances the check-out function, when executed on a
document in the shared document webpart, generated the same exception, as
reported here, and in other threads, repeatedly.

On a separate VM, I did install Share Point 2007 using the "standalone"
option and when I tested the checkout function on a document within the
shared document webpart on the default application created during the
installation, the function worked, error free.

I would request then, that you may wish to attempt to duplicate our error,
in the configuration defined in the scenario outlined in this report -- as
this would reveal if there were an issue with this particular Share Point
2007 configuration, requiring further discovery -- or if there were perhaps a
corruption that may have occurred (unreported) during our installation,
twice, on two separate servers -- on two separate networks.

Thanks very much -- and I appreciate your catching my question on this
forum; this error continues -- and if there were perhaps a software fix in
the future that would address, we would have greater confidence in this
particular configuration going forward with this preferred SharePoint 2007
"advanced complete standalone" farm installation method we have chosen to use.

Regards,

--Marie

"Alvin Bruney [MVP]" wrote:

> I'll take a chance and comment. I don't see why the machine key encryption
> should be the cause. If it were, a lot more than checkin/checkout would
> fail. Have you looked at permissions configurations for the users where this
> is failing? Check-in/out is basically a file copy. That is where I would
> start using a tool like filemon for instance.
>
> Have you also tried removing/deleting the document library and recreating
> it? Have you tried running the repair wizard on the site?
>
> --
> Regards,
> Alvin Bruney
> ------------------------------------------------------
> Shameless author plug
> Excel Services for .NET - MS Press
> Professional VSTO 2005 - Wrox/Wiley
> OWC Black Book www.lulu.com/owc
>
> "Marie" wrote in message
> news:9F53C45D-C7E1-4656-BC7F-C6259480FC90@microsoft.com...
> > Hi,
> >
> > Can somebody please comment on the following proposed fixes indicated for
> > the error discussed in this thread? I'd like your opinions -- are we on
> > the
> > right track --or is this a red herring we are following here?
> >
> > We have installed a single-server Sharepoint 2007 FARM (using the advanced
> > "Complete" option) and enabled our single application on port 80. The
> > application, features, subpages, and functions, work well except for the
> > document check-in, check-out, publishing options on any document we have
> > placed in the shared document webparts on any of our application pages.
> >
> > When you right-mouse-click on a document and select the "check-out"
> > option,
> > immediately you will receive an "Unknown Error" message, and the operation
> > fails. The same error occurs for Check-In, and "Publish" operations on
> > that
> > document (using the shared documents web part provided by Microsoft).
> >
> > We have trapped the following error when this occurs:
> >
> > "Unable to validate data. at
> > System.Web.Configuration.MachineKeySection.GetDecodedData(By te[] buf,
> > Byte[]
> > modifier, Int32 start, Int32 length, Int32& dataLength) at
> > System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
> >
> > There is much experience with this same error on the Internet; various
> > developers are explaining how with a Sharepoint 2007 Farm implementation,
> > developers need to explicitly define the machine key setting, not allowing
> > them to autogenerate.
> >
> > Have researched the following four links that describe this requirement:
> >
> >
> >
> > http://support.stormhosts.net/showthread.php?p=2521
> >
> >
> >
> > http://forums.whirlpool.net.au/forum-replies-archive.cfm/677 326.html
> >
> >
> >
> > http://www.kbalertz.com/Feedback.aspx?kbNumber=313091
> >
> >
> >
> > http://msdn2.microsoft.com/en-us/library/system.web.configur ation.machinekeysection.aspx
> >
> > The main concern I have in following any of these suggestions in repairing
> > this error that we've encountered with the check-out/check-in and publish
> > options on a document in the "Shared Documents" web part is that the
> > script
> > for the Sharepoint 2007 Complete installation did not tell us we needed to
> > set static machinekeys in web configuration files. So, I would feel
> > comfortable if I knew others had done the same in this scenario and were
> > successful.
> >
> > Thanks, everybody!
> >
> > --Marie
> >
> >
> >
> >
> > "James Crowley" wrote:
> >
> >> [Apologies for the duplicate, I posted the first from the wrong email
> >> alias]
> >> Hi everyone,
> >>
> >> My site is randomly firing off a "ExceptionHttpException : Unable to
> >> validate data. " error on some of its forms at the moment:
> >> -------
> >> HttpException : Unable to validate data.
> >> http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx
> >> (Referred
> >> by http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx)
> >> at System.Web.Configuration.MachineKeySection.GetDecodedData(By te[]
> >> buf,
> >> Byte[] modifier, Int32 start, Int32 length, Int32& dataLength)
> >> at System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
> >> -----------
> >> I can't reproduce it myself, but several users and the automatic error
> >> reports that have been generated indicate this. The site isn't running on
> >> a
> >> web farm or anything, the application pool isn't being recycled, and I've
> >> tried the standard solutions of specifying a fixed machine
> >> validation/encryption key, and I've also tried disabling the view state
> >> mac
> >> entirely, but the problem persists. Does anyone have any ideas what might
> >> be
> >> triggering this?
> >>
> >> Thanks,
> >>
> >> - James
> >> www.developerfusion.co.uk
>
>
>

Re: HttpException : Unable to validate data

am 05.09.2007 21:50:04 von Marie

This was trapped within SHAREPOINT 2007 DIAGNOSTICS 09/05/2007 15:46 when I
attempted to checkout the document. Clearly shows the error firing
immediately after the checkout function is executed.


Please reply.
Thanks.

--Marie

C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS

09/05/2007 15:27:36.65 w3wp.exe (0x0DA8) 0x0D48 Windows SharePoint Services
General 6t8h Verbose Found typical site /
(ed409383-1054-41d6-9ac8-3e30ea5a9c04) in web application SPWebApplication
Name=InfoCenter Parent=SPWebService.

09/05/2007 15:27:36.65 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 0 Verbose Releasing SPRequest with allocation Id
{C5827F61-4410-41B9-BE4D-5664F6FECC03}

09/05/2007 15:27:34.86 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 6t8b Verbose Looking up context site
http://thq-imail:80/_layouts/Checkin.aspx?FileName=http%3A%2 F%2Fthq%2Dimail%2FShared%20Documents%2FMaries%20Text%20File% 2Ertf&Checkout=true&Source=http%3A%2F%2Fthq%2Dimail%2FShared %2520Documents%2FForms%2FAllItems%2Easpx
in the farm SharePoint_Config

09/05/2007 15:27:34.86 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 6t8d Verbose Looking up the additional information about the typical
site
http://thq-imail:80/_layouts/Checkin.aspx?FileName=http%3A%2 F%2Fthq%2Dimail%2FShared%20Documents%2FMaries%20Text%20File% 2Ertf&Checkout=true&Source=http%3A%2F%2Fthq%2Dimail%2FShared %2520Documents%2FForms%2FAllItems%2Easpx.

09/05/2007 15:27:34.86 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 6t8f Verbose Site lookup is replacing
http://thq-imail:80/_layouts/Checkin.aspx?FileName=http%3A%2 F%2Fthq%2Dimail%2FShared%20Documents%2FMaries%20Text%20File% 2Ertf&Checkout=true&Source=http%3A%2F%2Fthq%2Dimail%2FShared %2520Documents%2FForms%2FAllItems%2Easpx
with the alternate access url http://thq-imail.

09/05/2007 15:27:34.86 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 6t8g Verbose Looking up typical site
http://thq-imail:80/_layouts/Checkin.aspx?FileName=http%3A%2 F%2Fthq%2Dimail%2FShared%20Documents%2FMaries%20Text%20File% 2Ertf&Checkout=true&Source=http%3A%2F%2Fthq%2Dimail%2FShared %2520Documents%2FForms%2FAllItems%2Easpx
in web application SPWebApplication Name=InfoCenter Parent=SPWebService.

09/05/2007 15:27:34.86 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 6t8h Verbose Found typical site /
(ed409383-1054-41d6-9ac8-3e30ea5a9c04) in web application SPWebApplication
Name=InfoCenter Parent=SPWebService.

09/05/2007 15:27:34.87 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 8nca Verbose Application error when access /_layouts/Checkin.aspx,
Error=Unable to validate data. at
System.Web.Configuration.MachineKeySection.GetDecodedData(By te[] buf, Byte[]
modifier, Int32 start, Int32 length, Int32& dataLength) at
System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)

09/05/2007 15:27:34.87 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 0 Verbose Releasing SPRequest with allocation Id
{FA1A1549-2EC4-4F59-9F4F-588BF30D7A93}

09/05/2007 15:27:34.87 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 0 Verbose Releasing SPRequest with allocation Id
{05FD4796-8A98-42E4-95BA-4246AC9DC302}

09/05/2007 15:27:34.87 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 0 Verbose Releasing SPRequest with allocation Id
{4B1BB8BC-B740-41F6-8501-1D8050480143}

09/05/2007 15:27:34.87 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
General 0 Verbose Releasing SPRequest with allocation Id
{519ACFB4-484F-4744-AB26-2D3F042BFF3B}


"Marie" wrote:

> Hello, Alvin,
>
> We've looked at the file monitor while executing the checkout option;
> nothing stood out in particular in the way of a failure on file copy; the
> error that we trap, repeatedly, during execution of the "checkout" option on
> a document in our shared library, is that httpexection: unable to validate
> data...discussed elsewhere on this same thread, as reported by other users
> having our configuration. We've reproduced the error twice in our
> environment, once on our test server where we initially installed SharePoint
> 2007 using the "advanced" complete, standalone options -- in a "Farm"
> configuration with a single-server, where we created an application on port
> 80, and then again, using the same configuration on our production server, on
> a separate network. In both instances, the SharePoint 2007 installations ran
> error-free; in both instances the check-out function, when executed on a
> document in the shared document webpart, generated the same exception, as
> reported here, and in other threads, repeatedly.
>
> On a separate VM, I did install Share Point 2007 using the "standalone"
> option and when I tested the checkout function on a document within the
> shared document webpart on the default application created during the
> installation, the function worked, error free.
>
> I would request then, that you may wish to attempt to duplicate our error,
> in the configuration defined in the scenario outlined in this report -- as
> this would reveal if there were an issue with this particular Share Point
> 2007 configuration, requiring further discovery -- or if there were perhaps a
> corruption that may have occurred (unreported) during our installation,
> twice, on two separate servers -- on two separate networks.
>
> Thanks very much -- and I appreciate your catching my question on this
> forum; this error continues -- and if there were perhaps a software fix in
> the future that would address, we would have greater confidence in this
> particular configuration going forward with this preferred SharePoint 2007
> "advanced complete standalone" farm installation method we have chosen to use.
>
> Regards,
>
> --Marie
>
> "Alvin Bruney [MVP]" wrote:
>
> > I'll take a chance and comment. I don't see why the machine key encryption
> > should be the cause. If it were, a lot more than checkin/checkout would
> > fail. Have you looked at permissions configurations for the users where this
> > is failing? Check-in/out is basically a file copy. That is where I would
> > start using a tool like filemon for instance.
> >
> > Have you also tried removing/deleting the document library and recreating
> > it? Have you tried running the repair wizard on the site?
> >
> > --
> > Regards,
> > Alvin Bruney
> > ------------------------------------------------------
> > Shameless author plug
> > Excel Services for .NET - MS Press
> > Professional VSTO 2005 - Wrox/Wiley
> > OWC Black Book www.lulu.com/owc
> >
> > "Marie" wrote in message
> > news:9F53C45D-C7E1-4656-BC7F-C6259480FC90@microsoft.com...
> > > Hi,
> > >
> > > Can somebody please comment on the following proposed fixes indicated for
> > > the error discussed in this thread? I'd like your opinions -- are we on
> > > the
> > > right track --or is this a red herring we are following here?
> > >
> > > We have installed a single-server Sharepoint 2007 FARM (using the advanced
> > > "Complete" option) and enabled our single application on port 80. The
> > > application, features, subpages, and functions, work well except for the
> > > document check-in, check-out, publishing options on any document we have
> > > placed in the shared document webparts on any of our application pages.
> > >
> > > When you right-mouse-click on a document and select the "check-out"
> > > option,
> > > immediately you will receive an "Unknown Error" message, and the operation
> > > fails. The same error occurs for Check-In, and "Publish" operations on
> > > that
> > > document (using the shared documents web part provided by Microsoft).
> > >
> > > We have trapped the following error when this occurs:
> > >
> > > "Unable to validate data. at
> > > System.Web.Configuration.MachineKeySection.GetDecodedData(By te[] buf,
> > > Byte[]
> > > modifier, Int32 start, Int32 length, Int32& dataLength) at
> > > System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
> > >
> > > There is much experience with this same error on the Internet; various
> > > developers are explaining how with a Sharepoint 2007 Farm implementation,
> > > developers need to explicitly define the machine key setting, not allowing
> > > them to autogenerate.
> > >
> > > Have researched the following four links that describe this requirement:
> > >
> > >
> > >
> > > http://support.stormhosts.net/showthread.php?p=2521
> > >
> > >
> > >
> > > http://forums.whirlpool.net.au/forum-replies-archive.cfm/677 326.html
> > >
> > >
> > >
> > > http://www.kbalertz.com/Feedback.aspx?kbNumber=313091
> > >
> > >
> > >
> > > http://msdn2.microsoft.com/en-us/library/system.web.configur ation.machinekeysection.aspx
> > >
> > > The main concern I have in following any of these suggestions in repairing
> > > this error that we've encountered with the check-out/check-in and publish
> > > options on a document in the "Shared Documents" web part is that the
> > > script
> > > for the Sharepoint 2007 Complete installation did not tell us we needed to
> > > set static machinekeys in web configuration files. So, I would feel
> > > comfortable if I knew others had done the same in this scenario and were
> > > successful.
> > >
> > > Thanks, everybody!
> > >
> > > --Marie
> > >
> > >
> > >
> > >
> > > "James Crowley" wrote:
> > >
> > >> [Apologies for the duplicate, I posted the first from the wrong email
> > >> alias]
> > >> Hi everyone,
> > >>
> > >> My site is randomly firing off a "ExceptionHttpException : Unable to
> > >> validate data. " error on some of its forms at the moment:
> > >> -------
> > >> HttpException : Unable to validate data.
> > >> http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx
> > >> (Referred
> > >> by http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx)
> > >> at System.Web.Configuration.MachineKeySection.GetDecodedData(By te[]
> > >> buf,
> > >> Byte[] modifier, Int32 start, Int32 length, Int32& dataLength)
> > >> at System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
> > >> -----------
> > >> I can't reproduce it myself, but several users and the automatic error
> > >> reports that have been generated indicate this. The site isn't running on
> > >> a
> > >> web farm or anything, the application pool isn't being recycled, and I've
> > >> tried the standard solutions of specifying a fixed machine
> > >> validation/encryption key, and I've also tried disabling the view state
> > >> mac
> > >> entirely, but the problem persists. Does anyone have any ideas what might
> > >> be
> > >> triggering this?
> > >>
> > >> Thanks,
> > >>
> > >> - James
> > >> www.developerfusion.co.uk
> >
> >
> >

Re: HttpException : Unable to validate data

am 17.09.2007 21:44:03 von Marie

Re-created sharepoint installation in a VM -- end-to-end, minus
customizations of the default master page. This error does not occur on a
fresh, new installation -- (using the advanced, complete options) with the
application running on port 80. In our environment, the default master page
has been modified. For now, this case is CLOSED.

"Marie" wrote:

> This was trapped within SHAREPOINT 2007 DIAGNOSTICS 09/05/2007 15:46 when I
> attempted to checkout the document. Clearly shows the error firing
> immediately after the checkout function is executed.
>
>
> Please reply.
> Thanks.
>
> --Marie
>
> C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS
>
> 09/05/2007 15:27:36.65 w3wp.exe (0x0DA8) 0x0D48 Windows SharePoint Services
> General 6t8h Verbose Found typical site /
> (ed409383-1054-41d6-9ac8-3e30ea5a9c04) in web application SPWebApplication
> Name=InfoCenter Parent=SPWebService.
>
> 09/05/2007 15:27:36.65 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 0 Verbose Releasing SPRequest with allocation Id
> {C5827F61-4410-41B9-BE4D-5664F6FECC03}
>
> 09/05/2007 15:27:34.86 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 6t8b Verbose Looking up context site
> http://thq-imail:80/_layouts/Checkin.aspx?FileName=http%3A%2 F%2Fthq%2Dimail%2FShared%20Documents%2FMaries%20Text%20File% 2Ertf&Checkout=true&Source=http%3A%2F%2Fthq%2Dimail%2FShared %2520Documents%2FForms%2FAllItems%2Easpx
> in the farm SharePoint_Config
>
> 09/05/2007 15:27:34.86 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 6t8d Verbose Looking up the additional information about the typical
> site
> http://thq-imail:80/_layouts/Checkin.aspx?FileName=http%3A%2 F%2Fthq%2Dimail%2FShared%20Documents%2FMaries%20Text%20File% 2Ertf&Checkout=true&Source=http%3A%2F%2Fthq%2Dimail%2FShared %2520Documents%2FForms%2FAllItems%2Easpx.
>
> 09/05/2007 15:27:34.86 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 6t8f Verbose Site lookup is replacing
> http://thq-imail:80/_layouts/Checkin.aspx?FileName=http%3A%2 F%2Fthq%2Dimail%2FShared%20Documents%2FMaries%20Text%20File% 2Ertf&Checkout=true&Source=http%3A%2F%2Fthq%2Dimail%2FShared %2520Documents%2FForms%2FAllItems%2Easpx
> with the alternate access url http://thq-imail.
>
> 09/05/2007 15:27:34.86 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 6t8g Verbose Looking up typical site
> http://thq-imail:80/_layouts/Checkin.aspx?FileName=http%3A%2 F%2Fthq%2Dimail%2FShared%20Documents%2FMaries%20Text%20File% 2Ertf&Checkout=true&Source=http%3A%2F%2Fthq%2Dimail%2FShared %2520Documents%2FForms%2FAllItems%2Easpx
> in web application SPWebApplication Name=InfoCenter Parent=SPWebService.
>
> 09/05/2007 15:27:34.86 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 6t8h Verbose Found typical site /
> (ed409383-1054-41d6-9ac8-3e30ea5a9c04) in web application SPWebApplication
> Name=InfoCenter Parent=SPWebService.
>
> 09/05/2007 15:27:34.87 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 8nca Verbose Application error when access /_layouts/Checkin.aspx,
> Error=Unable to validate data. at
> System.Web.Configuration.MachineKeySection.GetDecodedData(By te[] buf, Byte[]
> modifier, Int32 start, Int32 length, Int32& dataLength) at
> System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
>
> 09/05/2007 15:27:34.87 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 0 Verbose Releasing SPRequest with allocation Id
> {FA1A1549-2EC4-4F59-9F4F-588BF30D7A93}
>
> 09/05/2007 15:27:34.87 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 0 Verbose Releasing SPRequest with allocation Id
> {05FD4796-8A98-42E4-95BA-4246AC9DC302}
>
> 09/05/2007 15:27:34.87 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 0 Verbose Releasing SPRequest with allocation Id
> {4B1BB8BC-B740-41F6-8501-1D8050480143}
>
> 09/05/2007 15:27:34.87 w3wp.exe (0x0DA8) 0x0A00 Windows SharePoint Services
> General 0 Verbose Releasing SPRequest with allocation Id
> {519ACFB4-484F-4744-AB26-2D3F042BFF3B}
>
>
> "Marie" wrote:
>
> > Hello, Alvin,
> >
> > We've looked at the file monitor while executing the checkout option;
> > nothing stood out in particular in the way of a failure on file copy; the
> > error that we trap, repeatedly, during execution of the "checkout" option on
> > a document in our shared library, is that httpexection: unable to validate
> > data...discussed elsewhere on this same thread, as reported by other users
> > having our configuration. We've reproduced the error twice in our
> > environment, once on our test server where we initially installed SharePoint
> > 2007 using the "advanced" complete, standalone options -- in a "Farm"
> > configuration with a single-server, where we created an application on port
> > 80, and then again, using the same configuration on our production server, on
> > a separate network. In both instances, the SharePoint 2007 installations ran
> > error-free; in both instances the check-out function, when executed on a
> > document in the shared document webpart, generated the same exception, as
> > reported here, and in other threads, repeatedly.
> >
> > On a separate VM, I did install Share Point 2007 using the "standalone"
> > option and when I tested the checkout function on a document within the
> > shared document webpart on the default application created during the
> > installation, the function worked, error free.
> >
> > I would request then, that you may wish to attempt to duplicate our error,
> > in the configuration defined in the scenario outlined in this report -- as
> > this would reveal if there were an issue with this particular Share Point
> > 2007 configuration, requiring further discovery -- or if there were perhaps a
> > corruption that may have occurred (unreported) during our installation,
> > twice, on two separate servers -- on two separate networks.
> >
> > Thanks very much -- and I appreciate your catching my question on this
> > forum; this error continues -- and if there were perhaps a software fix in
> > the future that would address, we would have greater confidence in this
> > particular configuration going forward with this preferred SharePoint 2007
> > "advanced complete standalone" farm installation method we have chosen to use.
> >
> > Regards,
> >
> > --Marie
> >
> > "Alvin Bruney [MVP]" wrote:
> >
> > > I'll take a chance and comment. I don't see why the machine key encryption
> > > should be the cause. If it were, a lot more than checkin/checkout would
> > > fail. Have you looked at permissions configurations for the users where this
> > > is failing? Check-in/out is basically a file copy. That is where I would
> > > start using a tool like filemon for instance.
> > >
> > > Have you also tried removing/deleting the document library and recreating
> > > it? Have you tried running the repair wizard on the site?
> > >
> > > --
> > > Regards,
> > > Alvin Bruney
> > > ------------------------------------------------------
> > > Shameless author plug
> > > Excel Services for .NET - MS Press
> > > Professional VSTO 2005 - Wrox/Wiley
> > > OWC Black Book www.lulu.com/owc
> > >
> > > "Marie" wrote in message
> > > news:9F53C45D-C7E1-4656-BC7F-C6259480FC90@microsoft.com...
> > > > Hi,
> > > >
> > > > Can somebody please comment on the following proposed fixes indicated for
> > > > the error discussed in this thread? I'd like your opinions -- are we on
> > > > the
> > > > right track --or is this a red herring we are following here?
> > > >
> > > > We have installed a single-server Sharepoint 2007 FARM (using the advanced
> > > > "Complete" option) and enabled our single application on port 80. The
> > > > application, features, subpages, and functions, work well except for the
> > > > document check-in, check-out, publishing options on any document we have
> > > > placed in the shared document webparts on any of our application pages.
> > > >
> > > > When you right-mouse-click on a document and select the "check-out"
> > > > option,
> > > > immediately you will receive an "Unknown Error" message, and the operation
> > > > fails. The same error occurs for Check-In, and "Publish" operations on
> > > > that
> > > > document (using the shared documents web part provided by Microsoft).
> > > >
> > > > We have trapped the following error when this occurs:
> > > >
> > > > "Unable to validate data. at
> > > > System.Web.Configuration.MachineKeySection.GetDecodedData(By te[] buf,
> > > > Byte[]
> > > > modifier, Int32 start, Int32 length, Int32& dataLength) at
> > > > System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
> > > >
> > > > There is much experience with this same error on the Internet; various
> > > > developers are explaining how with a Sharepoint 2007 Farm implementation,
> > > > developers need to explicitly define the machine key setting, not allowing
> > > > them to autogenerate.
> > > >
> > > > Have researched the following four links that describe this requirement:
> > > >
> > > >
> > > >
> > > > http://support.stormhosts.net/showthread.php?p=2521
> > > >
> > > >
> > > >
> > > > http://forums.whirlpool.net.au/forum-replies-archive.cfm/677 326.html
> > > >
> > > >
> > > >
> > > > http://www.kbalertz.com/Feedback.aspx?kbNumber=313091
> > > >
> > > >
> > > >
> > > > http://msdn2.microsoft.com/en-us/library/system.web.configur ation.machinekeysection.aspx
> > > >
> > > > The main concern I have in following any of these suggestions in repairing
> > > > this error that we've encountered with the check-out/check-in and publish
> > > > options on a document in the "Shared Documents" web part is that the
> > > > script
> > > > for the Sharepoint 2007 Complete installation did not tell us we needed to
> > > > set static machinekeys in web configuration files. So, I would feel
> > > > comfortable if I knew others had done the same in this scenario and were
> > > > successful.
> > > >
> > > > Thanks, everybody!
> > > >
> > > > --Marie
> > > >
> > > >
> > > >
> > > >
> > > > "James Crowley" wrote:
> > > >
> > > >> [Apologies for the duplicate, I posted the first from the wrong email
> > > >> alias]
> > > >> Hi everyone,
> > > >>
> > > >> My site is randomly firing off a "ExceptionHttpException : Unable to
> > > >> validate data. " error on some of its forms at the moment:
> > > >> -------
> > > >> HttpException : Unable to validate data.
> > > >> http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx
> > > >> (Referred
> > > >> by http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx)
> > > >> at System.Web.Configuration.MachineKeySection.GetDecodedData(By te[]
> > > >> buf,
> > > >> Byte[] modifier, Int32 start, Int32 length, Int32& dataLength)
> > > >> at System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
> > > >> -----------
> > > >> I can't reproduce it myself, but several users and the automatic error
> > > >> reports that have been generated indicate this. The site isn't running on
> > > >> a
> > > >> web farm or anything, the application pool isn't being recycled, and I've
> > > >> tried the standard solutions of specifying a fixed machine
> > > >> validation/encryption key, and I've also tried disabling the view state
> > > >> mac
> > > >> entirely, but the problem persists. Does anyone have any ideas what might
> > > >> be
> > > >> triggering this?
> > > >>
> > > >> Thanks,
> > > >>
> > > >> - James
> > > >> www.developerfusion.co.uk
> > >
> > >
> > >

Re: HttpException : Unable to validate data

am 19.09.2007 18:40:02 von Marie

Hi, Alvin -- Thank you very much for your assistance in de-bugging this
problem -- and I'm glad that I DID NOT have to reset machine keys -- as was
indicated by the error. This solution path, as indicated by the error
message originally received from my application, was indeed a red-herring.
The solution path, which was to create a brand new VM with Windows 2003
Server and all patches installed -- with IIS, then install MS SQL 2005 with
all patches, then Sharepoint 2007 with the Advanced - Complete option prior
to creating the new application on port 80 was the correct way to test the
validity of the code. Sharepoint 2007 worked without errors - my site created
without errors; the whole thing was flawless. I did also follow best
practices regarding creating domain users (spadmin, spconfig, and spsearch)
to handle the installation and configuration of the farm services -- which
helped too. So, bottom line -- it was correct to avoid altering machine keys
- this is never the right answer for a Sharepoint2007 installation and we no
longer have the error since creating a new, pristine server environment.

Thanks to Microsoft for coming through on this one. I truly appreciated the
response and support I received in de-bugging this error.

--Marie

"Alvin Bruney [MVP]" wrote:

> I'll take a chance and comment. I don't see why the machine key encryption
> should be the cause. If it were, a lot more than checkin/checkout would
> fail. Have you looked at permissions configurations for the users where this
> is failing? Check-in/out is basically a file copy. That is where I would
> start using a tool like filemon for instance.
>
> Have you also tried removing/deleting the document library and recreating
> it? Have you tried running the repair wizard on the site?
>
> --
> Regards,
> Alvin Bruney
> ------------------------------------------------------
> Shameless author plug
> Excel Services for .NET - MS Press
> Professional VSTO 2005 - Wrox/Wiley
> OWC Black Book www.lulu.com/owc
>
> "Marie" wrote in message
> news:9F53C45D-C7E1-4656-BC7F-C6259480FC90@microsoft.com...
> > Hi,
> >
> > Can somebody please comment on the following proposed fixes indicated for
> > the error discussed in this thread? I'd like your opinions -- are we on
> > the
> > right track --or is this a red herring we are following here?
> >
> > We have installed a single-server Sharepoint 2007 FARM (using the advanced
> > "Complete" option) and enabled our single application on port 80. The
> > application, features, subpages, and functions, work well except for the
> > document check-in, check-out, publishing options on any document we have
> > placed in the shared document webparts on any of our application pages.
> >
> > When you right-mouse-click on a document and select the "check-out"
> > option,
> > immediately you will receive an "Unknown Error" message, and the operation
> > fails. The same error occurs for Check-In, and "Publish" operations on
> > that
> > document (using the shared documents web part provided by Microsoft).
> >
> > We have trapped the following error when this occurs:
> >
> > "Unable to validate data. at
> > System.Web.Configuration.MachineKeySection.GetDecodedData(By te[] buf,
> > Byte[]
> > modifier, Int32 start, Int32 length, Int32& dataLength) at
> > System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
> >
> > There is much experience with this same error on the Internet; various
> > developers are explaining how with a Sharepoint 2007 Farm implementation,
> > developers need to explicitly define the machine key setting, not allowing
> > them to autogenerate.
> >
> > Have researched the following four links that describe this requirement:
> >
> >
> >
> > http://support.stormhosts.net/showthread.php?p=2521
> >
> >
> >
> > http://forums.whirlpool.net.au/forum-replies-archive.cfm/677 326.html
> >
> >
> >
> > http://www.kbalertz.com/Feedback.aspx?kbNumber=313091
> >
> >
> >
> > http://msdn2.microsoft.com/en-us/library/system.web.configur ation.machinekeysection.aspx
> >
> > The main concern I have in following any of these suggestions in repairing
> > this error that we've encountered with the check-out/check-in and publish
> > options on a document in the "Shared Documents" web part is that the
> > script
> > for the Sharepoint 2007 Complete installation did not tell us we needed to
> > set static machinekeys in web configuration files. So, I would feel
> > comfortable if I knew others had done the same in this scenario and were
> > successful.
> >
> > Thanks, everybody!
> >
> > --Marie
> >
> >
> >
> >
> > "James Crowley" wrote:
> >
> >> [Apologies for the duplicate, I posted the first from the wrong email
> >> alias]
> >> Hi everyone,
> >>
> >> My site is randomly firing off a "ExceptionHttpException : Unable to
> >> validate data. " error on some of its forms at the moment:
> >> -------
> >> HttpException : Unable to validate data.
> >> http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx
> >> (Referred
> >> by http://www.developerfusion.co.uk/Members/Private/EditProfile .aspx)
> >> at System.Web.Configuration.MachineKeySection.GetDecodedData(By te[]
> >> buf,
> >> Byte[] modifier, Int32 start, Int32 length, Int32& dataLength)
> >> at System.Web.UI.ObjectStateFormatter.Deserialize(String inputString)
> >> -----------
> >> I can't reproduce it myself, but several users and the automatic error
> >> reports that have been generated indicate this. The site isn't running on
> >> a
> >> web farm or anything, the application pool isn't being recycled, and I've
> >> tried the standard solutions of specifying a fixed machine
> >> validation/encryption key, and I've also tried disabling the view state
> >> mac
> >> entirely, but the problem persists. Does anyone have any ideas what might
> >> be
> >> triggering this?
> >>
> >> Thanks,
> >>
> >> - James
> >> www.developerfusion.co.uk
>
>
>